SOHC.co.uk Forums > Project Board
CB 500 resurrection
gary123:
Yep, done that. Ill try to take some pics.
gary123:
--- Quote from: McCabe-Thiele (Ted) on October 11, 2022, 08:11:17 PM ---Is it the right rotor for the engine & is it bolted up tight?
The stator is held in place with a series of 3 or 4 bolts into the housing.
Is it the correct housing & stator?
--- End quote ---
Well I've got a mix of parts but its def 500 or 550. Which I think are the same. They certainly look it and I'm thinking it works cos the engine ran with the battery disconnected.
McCabe-Thiele (Ted):
--- Quote from: gary123 on October 11, 2022, 07:59:27 PM ---So today I couldn't resist a trial start up. After 5 or 6 tries it started and ran and revd.
--- End quote ---
Can't believe that box of bits with a wheeled frame is already a runner - well done Gary.
gary123:
Cheers Ted, but "runner" is a bit optimistic at the moment.
Nurse Julie:
Have you got the alternator and stator in the right way round Gary?. There should be clearance if they are fitted correctly. And is the flywheel correctly torqued?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version