SOHC.co.uk Forums > Project Board
CB 500 resurrection
gary123:
The camshaft cleaned up with minimal effort and no sign of pitting.
What do you think of the bores? [ Guests cannot view attachments ] [ Guests cannot view attachments ] [ Guests cannot view attachments ]
Trigger:
You can not go by looks. You need to take it to a machine shop to be measured up and the pistons must match the bores. Using Honda pistons, bore to piston clearance needs to be 0.0200 mm ;) And a lot of machine shops do not understand how tight it needs to be. Any machine shop who says, it is too tight and will seize, walk away ;)
gary123:
Got it . Thanks
Nurse Julie:
The bores don't look good, I would definitely have a rebore
Bryanj:
DO NOT use a 3 legged, or 2 legged, puller on the rotor, you need the proper tool or yo will wreck both it and the crank
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version