SOHC.co.uk Forums > CB500/550

Wiring my CB550F2 from 1978

<< < (4/4)

alexdecker:
On the wiring diagram, the front signal lights have two wires and are grounded through the green wire. On the parts list for my bike, the front signal lights only have one wire.

How are the front signals grounded. Is that through the bolts in the sides of the headlight shell that then goes to a green grounding connector?

McCabe-Thiele (Ted):

--- Quote from: alexdecker on July 26, 2022, 05:45:04 AM ---
--- Quote from: McCabe-Thiele (Ted) on July 25, 2022, 09:11:49 PM ---I found my original loom had colour faded quite badly plus I had a none UK left side handlebar switch unit though it looked original in terms of age. Just no pass switch & different horn wiring.

I made up a mini loom for the rear lamp unit to retain the original colours as mine was in very poor condition. If you PM me your e-mail address I can send you my XL wiring spreadsheet if that helps.

--- End quote ---

Thank you, I would love that! You can send it to alex@alexdecker.dk. Or share it in here for others to enjoy as well!

--- End quote ---

I've only just realised yours is not a 400, I've sent the XL sheet anyway but had an auto out of office reply until early August.

Oddjob:

--- Quote from: alexdecker on July 26, 2022, 08:10:32 AM ---On the wiring diagram, the front signal lights have two wires and are grounded through the green wire. On the parts list for my bike, the front signal lights only have one wire.

How are the front signals grounded. Is that through the bolts in the sides of the headlight shell that then goes to a green grounding connector?

--- End quote ---

Yes.

Navigation

[0] Message Index

[*] Previous page