SOHC.co.uk Forums > CB500/550
Back with a 500 ....
deltarider:
I'll soon make a pic of what I use. It's a very little wrench from a set of socalled precision tools: 5,5 mm. To prevent the other end from turning, I use a dito little socket - you don't need the ratchet, the socket is enough - also 5,5mm. Works perfect. Not so perfect but usable: the supplied pliers in the Honda tool bag.
JezzaPeach:
Great tips many thanks. :)
Oddjob:
I have a very small spanner that came in a tool kit from some bike or other, works a treat.
Laverdaroo:
These are quite good, about 12 quid off flea bay. Start at 5mm and go to 11 surprisingly. They’re dead thin and really handy for those sorts of jobs. Starter motor nuts etc….
Sent from my iPhone using Tapatalk
SPR:
--- Quote from: Laverdaroo on September 04, 2022, 11:39:51 PM ---These are quite good, about 12 quid off flea bay. Start at 5mm and go to 11 surprisingly. They’re dead thin and really handy for those sorts of jobs. Starter motor nuts etc….
Sent from my iPhone using Tapatalk
--- End quote ---
found these
https://www.ebay.co.uk/itm/193263715652?epid=172611339&hash=item2cff6a4544:g:LHMAAOSwSlBYuutX&amdata=enc%3AAQAHAAAAoPOJjELp4nvD44CRV2W1H9jiaP8%2BSvpbMKfvh%2F1RX31DqDvZyoVRylgF511uDGK%2BsfFxh6DA9d0jMsKuXfh1QrRRP0%2FKMHXwczGRGI0SSXjvPhQGO6FfjkCwdz1h44NtJTf2rbOzeJAEkt5kUw6in%2B%2BcDCMHU4z0GzUGml0e0aG5JYVSFKiC4a0G3RwztrGB2DzDYe1QHJlq3DnsesbT86k%3D%7Ctkp%3ABk9SR_jd-r3hYA
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version