SOHC.co.uk Forums > CB500/550
Has anyone used these coils?
martin_uk:
My general experience with Chinese parts and tools is not good.
The exception is well known brands with a good reputation.
But as they say you pays your money and takes your choice......
beardylondon:
Thanks all, probably go for the previously mentioned ones, which don’t come with plugs, but are already being used by Ted
beardylondon:
I emailed this seller to ask what the primary resistance of these is, knowing I won't buy, but I was interested, and this is their response:
"primary resistance is ?
we can resistance
thank you"
:-\
--- Quote from: beardylondon on April 16, 2024, 05:25:18 PM ---This set seems too cheap to be any good?!
https://www.ebay.co.uk/itm/195978773341?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=a5qr2fnqtcu&sssrc=4429486&ssuid=wmWanCu3SsS&var=&widget_ver=artemis&media=COPY
--- End quote ---
McCabe-Thiele (Ted):
Just found this information that I posted here a while back. I think I spelt Hendler wrong.
"I fitted these (Hedler) as they are probably a temporary measure until I restore my originals.
They are Primary 5.11 Ohms - S 17.55 Ohms made by Hedler the spec is on Hedlers website p/n 540612H
I did not use the screws shown in the picture mounted them in the original saddle at each end.
I switched the wiring so the poitive marked terminal was on the ignition feed side."https://www.hendler.co.uk/category/ignition-coils
Although this is the trade site you can still search the part number & find the coil specifications.
.
beardylondon:
funnily enough I was looking at Hendler's website this morning and found them on ebay for £24.49, same part number
https://www.ebay.co.uk/itm/176189478084?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version