SOHC.co.uk Forums > CB500/550

Koni shocks - rebuild info

<< < (4/5) > >>

Erny:
I need to check if there is some type number on my shocks, but obviously these are not 7610 type. However, length as OEM (~320mm) and except conflict with chain guard they fit

Matt_Harrington:

--- Quote from: Bryanj on April 01, 2024, 11:31:59 PM ---Old Konis are difficult if not impossible to get parts for, the later ones you gan get parts from Ikon

--- End quote ---

Bryan, unless you can point me somewhere else, I can only find parts available from Ikon in Oz. The UK distributor has now stopped importing them. I'm after seals (for my Guzzi shocks)

Bryanj:
Ñobody apart from ikon to the best of my knowledge

dave400:

--- Quote from: Erny on April 02, 2024, 11:07:19 AM ---I need to check if there is some type number on my shocks, but obviously these are not 7610 type. However, length as OEM (~320mm) and except conflict with chain guard they fit

--- End quote ---

They look like 76k 1320 series shocks ( the number was behind the white plastic cover behind the spring) the same as I have on my 400. I was told by a guy at Koni all the parts are available for the internals as they use the same parts as used in car shocks.

deltarider:

--- Quote from: dave400 on April 04, 2024, 11:05:07 AM ---[...]
They look like 76k 1320 series shocks ( the number was behind the white plastic cover behind the spring) the same as I have on my 400. [...]

--- End quote ---
76k or 7610? 1320 or 1302?

Navigation

[0] Message Index

[#] Next page

[*] Previous page