SOHC.co.uk Forums > CB350/400
Measurement needed please.
Nurse Julie:
Would anyone by chance have a set of 400 forks apart at the moment?.
I need the measurement of the depth of the recess where the fork bottom bolts go in (as per the attached photo).
Ta very much.
[ Guests cannot view attachments ]
McCabe-Thiele (Ted):
I make it 10.8 mm with my calipers.
Seems an unlikely depth.
I would seek a second opinion.
Nurse Julie:
--- Quote from: McCabe-Thiele (Ted) on October 08, 2022, 08:34:32 PM ---I make it 10.8 mm with my calipers.
Seems an unlikely depth.
I would seek a second opinion.
--- End quote ---
That's what I thought it was Ted.
Thanks for doing that.
Orcade-Ian:
Hi Julie,
Very strange thing, I've just measured 2 pairs of spare sliders - one pair are 8.11 and 8.08 and the other pair are 9.95 and 9.88 and no, there are no washers stuck inside the first pair!
This is from the lowest point on the spindle curve to the seat where the damper tube bolt fits,
Confused of Orkney!
Nurse Julie:
--- Quote from: Orcade-Ian on October 08, 2022, 08:51:06 PM ---Hi Julie,
Very strange thing, I've just measured 2 pairs of spare sliders - one pair are 8.11 and 8.08 and the other pair are 9.95 and 9.88 and no, there are no washers stuck inside the first pair!
This is from the lowest point on the spindle curve to the seat where the damper tube bolt fits,
Confused of Orkney!
--- End quote ---
Mmmmm, very interesting Ian. That confuses me even more 🤔🤔🤔
Navigation
[0] Message Index
[#] Next page
Go to full version