SOHC.co.uk Forums > CB350/400

Strange jets on 400/4 carbs

(1/4) > >>

Matt_Harrington:
I'm fairly certain the spare set of carbs I have (that are in the process of being restored) have never been opened up. On dismantling there are a couple of jets that look very strange.
They are straight but the 'holes' look to be crushed - most peculiar.  I hope you can see from the photo attached. Any thoughts? Needless to say they won't be going back in!
[ Guests cannot view attachments ]

Matt

McCabe-Thiele (Ted):
I have my original 400 set if you want them f.o.c.just postage?

Matt_Harrington:
I only need 2!!
Matt

Johnny4428:
Matt these look as if there been tightened against some sort of restriction. Are these the correct ones for your carb?

Matt_Harrington:
Yes, I think they are the correct ones (makered 38) but What I will do later is to measure the bore depth of all of the bores they screw into. It is possible the bores are not all drilled to the same depth (but unlikely!)
Matt

Navigation

[0] Message Index

[#] Next page