SOHC.co.uk Forums > CB650

clutch cover/right hand crankcase

(1/1)

kemp2368:
hi all,can anyone help me  :'(
while adjusting the clutch today,the part that comes off the case and holds the clutch cable decided to break off ???has anyone got a spare cover or got any ideas how i can attach the cable/adjusting nut
thanks

florence:
If it's clean, araldite might hold it but be sure to give it ages to cure.  Once cured it's probably stronger than the aluminium itself.  It would at least get you going until a new part can be found at the right price.

Bryanj:
There is a lot of bending moment on that part so i doubt araldite would hold but a good tig welder should be able to sort it

kemp2368:
thanks,i have managed to stick it with a industrial strengh super glue we use at work(its from wurth)and to my surprise it has held so far(done about 10 miles today
the only cases i can find at the moment are from the u.s.a and all a bit pricey :'(
does anyone no if diff models will fit??

kemp2368:
got a case from the u.s.a,only worked out to be

Navigation

[0] Message Index