SOHC.co.uk Forums > SOHC Singles & Twins

CB200 carb issues

<< < (3/22) > >>

K2-K6:
Many of the car type are pleated paper that could be cut to size in replication.

Something like range rover 3.9 89/92 yrs is a non structured type of mostly paper that's only held in place by airbox structure and may be suitable to cut.

Or visiting local auto factors to see if you can find a suitable donor.

K2-K6:
Looks like this

[ Guests cannot view attachments ]


Don't think they're expensive either.

Johnwebley:

--- Quote from: Oddjob on November 24, 2022, 10:19:45 PM ---Not exactly want you need to see John but.

https://classic-bikes.de/en/honda-luftfilter-satz-17200-354-005-3

Might solve the problem but bloody hell that's expensive.

--- End quote ---


   OK,I have succumbed,
   cost so far not to bad,

  I expect to have to pay about £40 duty plus handling charge to DHL,

   jeez,

Laverda Dave:
John, there was a feature in Classic Bike Guide a couple of months ago and written by Steve Cooper of VJMC fame. He is restoring a Yamaha 125 twin and needs new air filters that are unobtainable. He made his own filters and he runs through exactly how to do it. As long as you still have the end plates of your original filter it's quite easy to make. He gives details of the suppliers of the bits you need to make them. All very similar to the idea put forward by Nigel in his reply above.
Making them yourself will be a lot cheaper. You can get copies of CBG via the Mortons website.

Johnwebley:


     Thanks Dave,

 I shall check that out ,

 My 125 Yam uses two foam  doughnuts over a centre intake  in an airbox,

  that works OK

Navigation

[0] Message Index

[#] Next page

[*] Previous page