General > Out & About
OUT AND ABOUT 2023
AshimotoK0:
Also saw this on show at Stafford last Saturday, which look nice and not over blingy.
https://steelcityclassics.co.uk/classic-bikes/honda/cb400-four/158272.htm
Had the rear axle the correct way round but how DARE they sell it with carb air screw plastic caps missing. That would have driven me insane owning that bike. Not to mention the handlebar clamp bolts.
McCabe-Thiele (Ted):
I agree with you about the air screw caps Ash I would insist on those.
Handlebar clamp bolts must be Chrome or even SS.👍👍👍
Johnny4428:
Think they are stainless like a lot of bolts on that bikeTed but they have got too much going on in the lettering dept.
Oddjob:
You can file the marking off and repolish the top if you need to.
I'd be more concerned about why there is only 1 pic of the left hand side and that's from a distance, plenty of close ups of the right. The wiring is wrong as well, going above the headstock and under the tank there.
McCabe-Thiele (Ted):
--- Quote from: Johnny4428 on October 21, 2023, 01:47:42 PM ---Think they are stainless like a lot of bolts on that bikeTed but they have got too much going on in the lettering dept.
--- End quote ---
I thought they were BZP flange bolts - dull for SS.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version