SOHC.co.uk Forums > CB500/550

Fuel pipe question F1

(1/2) > >>

Orcade-Ian:
Mornin' folks,
This bank of carbs I've just about finished (believed 72-73 CB500) has large holes in the alloy mounting plate for the flex fuel pipes to go through towards the head, originally to connect to the double outlet tap.  My tap has only one outlet so I've fitted a brass Tee piece.  Double outlet taps seem unavailable, even though they could be dismantled, i.e. not rivetted, so I'm wondering if 3&4 are likely to suffer starvation at WOT with this set-up.

Is everyone using the same set-up?

Ian

mickwinf:
My f2 had the same set up with one pipe from tap then split into two, had no problem with fuel starvation at high revs.

McCabe-Thiele (Ted):
Is it like this one?
https://www.ebay.co.uk/itm/373374934262?hash=item56eee15cf6:g:vXcAAOSwzlpgXvAV&amdata=enc%3AAQAHAAAA4MVFPy72CXxsrPG3rmlQNHbfBHUi8FzGe2KKmWWLo2KQeu%2BovfSTYE%2FGIeI3cAY54sqym1AmC4TiLYf55DEUTyLOSMPeGOPKS26JAwq4JNg0nyCfp4yNMrfTPVrd%2FZXvuf2arETLNy4rg8xvFtrN3K5nmybPXhMXKVNHfm9GPCaqnjziz5eE4GcV3tknGt8jgtbLO%2F9dtqUcyhkj537mSCNjWx0So%2FtxdwA1V%2BOUzpzdd7QY8UkGUr9TyZkF12Yie%2B5x1bEAd9yMzHrDGFPqC9Pd0vWfpg1eCHbOD%2BjGcNn2%7Ctkp%3ABk9SR5Tkr5awYQ

Or this one.

https://www.ebay.co.uk/itm/285066732752?_trkparms=amclksrc%3DITM%26aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D244883%26meid%3Dd5f85f9abd8748728847a8e2b82639ca%26pid%3D101195%26rk%3D5%26rkt%3D12%26sd%3D373374934262%26itm%3D285066732752%26pmt%3D1%26noa%3D0%26pg%3D2047675%26algv%3DSimplAMLv11WebTrimmedV3MskuWithRevOptLambda90KnnRecallV1&_trksid=p2047675.c101195.m1851&amdata=cksum%3A285066732752d5f85f9abd8748728847a8e2b82639ca%7Cenc%3AAQAHAAABEPZqctS1aW2Gn1fMafrLrPa7%252BqLD2Pgo5GTgCDTJgIpBMBHaBHcFvdVGNBWeIytK8U7x8RargP9Bv5VZgW5ZIFPN%252FobtLoFVbnlzv6Cgaand%252BKN7i7JHecepWCTAxGqswGtLYf5hHPjaB422qfzcfacdrV4gXYjZtfM9yvoETyTLLPIE7GQSYNK%252F7rkyb42qbz63loO6G%252BbKl8fkDTiCEuGXm3W%252BYYcnxlpvekSRZbeLjPJLMQHd0mYsLk0sXKCSPHSam6e%252BKea8bZU6AUmVJvlk95tHM%252F4fVEMUfVih1eA7zmExNPBzST1zZGW3xMSufUW2G5BL2KrrnJW3dkBgl%252BLTB%252BmDNc2Sb3qWjBQ2NtZh%7Campid%3APL_CLK%7Cclp%3A2047675

' I did see one listed before Christmas that was by the description a part built for the supplier to an original specification  but deleted the item from my watch list I think it was priced at around £24.

SteveW:
I bought a double outlet tap for my 550 K0 about 4 years ago from Wemoto in Brighton.

Orcade-Ian:
Hi Ted,
Thanks for the links and although they are double outlet, the fitting is different - the F type are threaded on to a spigot, like 400/4
I'll have a look at Wemoto, thanks Steve.  I can't see me wanting to wring its neck very often but wouldn't like to chance it when you suddenly need that extra bit - if yours had no problem Mick, then I might have to go with it if nowt else turns up!

Ian

Navigation

[0] Message Index

[#] Next page