500 aftermarket wheel rim options

[McCabe-Thiele (Ted)]

I spent some time today day dreaming about what rims I would eventually fit on the 500 whilst cleaning off  rust on my front wheel rim.
 
I might eventually  go for anodised alloy again or even Stainless rims,  I came across the term "Valanced" & Non-Valanced rims.

Am I right in thinking the original rims were non-valanced anyone here put Valanced rims on an old Honda what is the advantage if any on an old bike?

[Bryanj]

Non, dirt traps mate but Akront was the name in alloys and they used to ball vallenced

[K2-K6]

They are of that period Ted, and more often used in racing so not out of place in that respect. That's the valanced rim in aluminium.

Their advantage then was effectively an I-beam (think rsj) in rolled aluminium section (rolling gives a forged (aligns the metal grain within the piece*) type structure to the metalwork) subsequently again rolled into the rim circle. This can be the lightest and strongest rim for a spoked wheel and combined with lightweight race tires would offer one of the best race wheels with conventional spokes.

* ooh look, double parentheses 

I think they look good, but quite a particular choice and maybe suggest more of a production racer vibe.

Stainless i think look good too, and aluminium non valanced are available. 

[K2-K6]

These show some options Ted http://www.williswheels.co.uk/rim-selection.html even have a nut brown sample I can see  obviously some chaps of distinction in choice terms 

[Laverdaroo]

Ted, the new rims I remortgaged for to put I. The 550 are balanced, almost like an ‘H’shape.

They look the dang lies though and are much better to the eye than the standards……..


See, had some boots put in yesterday and hurriedly bobbed the front on to have a look see……….. we’ll chuffed!


Sent from my iPhone using Tapatalk

[McCabe-Thiele (Ted)]

What make & width rims are they Roo?

Are they classed as valanced?

[Laverdaroo]

they came from central wheels in birmingjham Ted, 18" rear 10" front both 2.15

Avon roadrideres are rhe boots/ With stainlessspokes it was rather expensive but I'll get that dosh backif I flog it.......which is highly likely.

[Laverdaroo]

Forgot, they are EXCEL VALANCED, FLANGED alloy rims  and not 2.15! Front is a 1.85 the rear a 2.15

[McCabe-Thiele (Ted)]

Forgot, they are EXCEL VALANCED, FLANGED alloy rims  and not 2.15! Front is a 1.85 the rear a 2.15

C.W.C. have those - well tidy - daren't mention the cost to SWMBO.

[philward]

Few years since I bought the alloys on my CR750 Rep but used Italian Borrani replica's  - off ebay, possibly
from this source (not necessarily the size you need but maybe source via this seller)

eBay item number:354042531344

[SPR]

Forgot, they are EXCEL VALANCED, FLANGED alloy rims  and not 2.15! Front is a 1.85 the rear a 2.15

C.W.C. have those - well tidy - daren't mention the cost to SWMBO.

The rims on the Laverda are flanged .... they look absolutely stunning

[ka-ja]

flanged alloy front rim with st/steel spokes
    [ Guests cannot view attachments ]

[McCabe-Thiele (Ted)]

So is Flanged essentially the same as Valanced - they look a tad caresque if that's a word but neat all the same.

[Sesman]

Ted, the new rims I remortgaged for to put I. The 550 are balanced, almost like an ‘H’shape.

They look the dang lies though and are much better to the eye than the standards……..


See, had some boots put in yesterday and hurriedly bobbed the front on to have a look see……….. we’ll chuffed!

Hell yeah. Absolutely sweating class those wheels. I like them, I like them a lot.


Sent from my iPhone using Tapatalk

[Laverdaroo]

The knackers are'nt they Phil

I'll post yer thingy this week, just havent had a chance bud, sozza.