SOHC.co.uk Forums > Project Board
Project 550 is go
gary123:
Didn't need to, came out easy. Your right, left and fred, so good advice. Cheers.
gary123:
Bit of progress stripping down. Sadly the downpipes are rotten so not sure what to do about that, new ones for Motad cannot be found so maybe delkevic.
On the plus side I found a tool kit of sorts and the original handbook (i think). Might put that on ebay, they seem to fetch silly money. [ Guests cannot view attachments ] [ Guests cannot view attachments ]
gary123:
[ Guests cannot view attachments ] [ Guests cannot view attachments ]
Oddjob:
Tool kit is almost all there.. The spark plug spanner is original, bit battered but better than you can buy new these days. You're missing the flat bladed screwdriver and it's handle, the spanner isn't original, there should be a 10x12mm spanner and a 14x17mm spanner IIRC, the C spanner also doesn't look right. Does the box spanner fit the rear wheel nut? it's a 26mm one and for some reason I suspect it should be 27mm, the 500 used 26mm so it could be the same.
Laverdaroo:
I have a tool kit and the C spanner is different in that and I think its a correct collection. I might have a spare handle as well I think, I'm in there tmrw and I'll have a look for you. ;)
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version