SOHC.co.uk Forums > CB500/550

Handlebar sizes for 500

<< < (3/9) > >>

Sesman:
Mine are UK 550 bars with holes are identical in measurement to Oddjobs. I’d wager you have the wrong bars.

Oddjob:
Try these Ted, https://www.davidsilverspares.co.uk/CB550F2-SUPER-SPORT-1977/part_188996/

Sesman:
Yes, they’re the ones I bought. Recommended.👍

Sesman:
Incidentally, buy genuine grips too as the pattern ones are 10mm too short!

McCabe-Thiele (Ted):
This is how they sit in the clamps. I can't show the left side with the serrations central as the right side sits on the curve of the bars pulling it back so as to speak.
Not sure how the 500 DS bars differ from the 550 ones I will check the bar diameter as well as the holes before I order anything.
I have the grips suggested by Ken for the 1100 I think it was - correction 1300. (amended)

bar fit by Macabe Thiele, on Flickr

Navigation

[0] Message Index

[#] Next page

[*] Previous page