SOHC.co.uk Forums > CB500/550

Handlebar sizes for 500

<< < (8/9) > >>

Seabeowner:
Yes, don't think the Silver's had drillings for the locating pegs.

McCabe-Thiele (Ted):
They are the correct width across the serrations so duly ordered.

Sesman:
Mine had the drillings for the switchgear, but definitely did not have the alignment punch marks.

Oddjob:
If the locating peg holes aren't there let me know and I'll measure my bars and advise as they are off at the present.

McCabe-Thiele (Ted):
OK

Navigation

[0] Message Index

[#] Next page

[*] Previous page