SOHC.co.uk Forums > CB350/400

Fitting a new wiring loom

<< < (2/5) > >>

McCabe-Thiele (Ted):
Do you mean this one?

.rear lower loom by Macabe Thiele, on Flickr

Multiman:
Thanks for three-ply Ted but no it's the "sock" or boot that contains the connectors for the rear light, brake light etc
Your bike looks a real beauty!

McCabe-Thiele (Ted):
If it's not this one the other one sits under the seat iirc just reaches the plastic section of the rear mudguard.
Again not my bike  - it's what I used when fitting my loom.

this one by Macabe Thiele, on Flickr

Multiman:
Cheers Ted.
Thanks for that.
I was really trying to work out how far to pull the loom back as the brake light wiring has been cut too short by the PO.
I'll have to rewire the light cluster.

Multiman:
Hi all
I've fitted the loom and have come across a problem that I don't know how to fix.

If I turn the ignition on and set the light switch to P or H I don't get a front parking light, a tail light or Speedo and Tacho lights.
Headlight works as expected and I can get a parking light and tail light when the ignition key is turned past the on position to P.

Anyone come across this before?

Would I be right in thinking I need to make up the lead indicated below?
Its on some diagrams and not others.
Many thanks
Tim

Navigation

[0] Message Index

[#] Next page

[*] Previous page