SOHC.co.uk Forums > Anorak's Corner

Moulded N.L.A. Unobtanium Parts

<< < (2/3) > >>

AshimotoK0:
I don't think your mudguard used those washers Phil or do you mean the air filter ones?

Rubber stay cushion washer fits these models

FITS MODELS
CB250 GENERAL EXPORT
CB250 JAPAN
CB250K0 AUSTRALIA
CB250K0 BELGIUM
CB250K0 ENGLAND
CB250K0 FRANCE
CB250K0 GENERAL EXPORT
CB250K0 GERMANY
CB250K3
CB250K3 GENERAL EXPORT
CB250K4 ENGLAND
CB250K4 FRANCE
CB250K4 GERMANY
CB350 GENERAL EXPORT
CB350 JAPAN
CB350K0 SUPER SPORT AUSTRALIA
CB350K0 SUPER SPORT BELGIUM
CB350K0 SUPER SPORT ENGLAND
CB350K0 SUPER SPORT FRANCE
CB350K0 SUPER SPORT GENERAL EXPORT
CB350K0 SUPER SPORT GERMANY
CB350K3
CB350K3 SUPER SPORT GENERAL EXPORT
CB350K4 ENGLAND
CB350K4 FRANCE
CB350K4 GERMANY
CB350P GENERAL EXPORT
CB350P JAPAN
CB350P0 GENERAL EXPORT
CB350P4 POLICE TYPE GENERAL EXPORT / KPH MPH
CB450
CB450K1 1968 USA
CB450K1 U.S.A
CB450K2 1969 USA

philward:

--- Quote from: AshimotoK0 on February 17, 2023, 05:59:49 PM ---I don't think your mudguard used those washers Phil or do you mean the air filter ones?

Rubber stay cushion washer fits these models

FITS MODELS
CB250 GENERAL EXPORT
CB250 JAPAN
CB250K0 AUSTRALIA
CB250K0 BELGIUM
CB250K0 ENGLAND
CB250K0 FRANCE
CB250K0 GENERAL EXPORT
CB250K0 GERMANY
CB250K3
CB250K3 GENERAL EXPORT
CB250K4 ENGLAND
CB250K4 FRANCE
CB250K4 GERMANY
CB350 GENERAL EXPORT
CB350 JAPAN
CB350K0 SUPER SPORT AUSTRALIA
CB350K0 SUPER SPORT BELGIUM
CB350K0 SUPER SPORT ENGLAND
CB350K0 SUPER SPORT FRANCE
CB350K0 SUPER SPORT GENERAL EXPORT
CB350K0 SUPER SPORT GERMANY
CB350K3
CB350K3 SUPER SPORT GENERAL EXPORT
CB350K4 ENGLAND
CB350K4 FRANCE
CB350K4 GERMANY
CB350P GENERAL EXPORT
CB350P JAPAN
CB350P0 GENERAL EXPORT
CB350P4 POLICE TYPE GENERAL EXPORT / KPH MPH
CB450
CB450K1 1968 USA
CB450K1 U.S.A
CB450K2 1969 USA

--- End quote ---

Yes, air filter balance tube rubbers Ash

Laverda Dave:
Nice work Ash. A lot of time & effort put in there to get a perfect result👍

AshimotoK0:

--- Quote from: philward on February 17, 2023, 08:25:42 PM ---
--- Quote from: AshimotoK0 on February 17, 2023, 05:59:49 PM ---

--- End quote ---

Yes, air filter balance tube rubbers Ash

--- End quote ---


OK .. may be a few weeks before I can get a mould done though.

SumpMagnet:
Fascinating!!

Where do you get your PU rubber stuff from? I have been contemplating trying something similar for an unrelated application making tyres for an RC tank project ....

I can make the 3d printed mould quite easily. I assume the compound just gets poured into the lower mould, and the top clamped down, with some vent holes to let the excess out, and to pressurise the mould to get any air bubbles out. Would potentially also allow me to 3D print the wheels first...put hte wheels in the mould, and cast tyres around them to 'key' them in.

I tried making footrest rubbers once in a plaster mould. The stuff I had to mould with was horrid, and the results fit only for the bin. Never thought to 3D print a mould. Obvious when someone else does it......

Navigation

[0] Message Index

[#] Next page

[*] Previous page