SOHC.co.uk Forums > CB500/550

90165-323-000 caliper bolts

<< < (2/3) > >>

Seabeowner:
I bought a couple a few years ago, but was disappointed with the finish, so cleaned up the old ones and fitted new washers instead.

Oddjob:
I replaced mine with stainless steel Ted, the originals are not stamped with any high tensile marks AFAIK.

However you need metric fine bolts and a 14mm head for best fit.

McCabe-Thiele (Ted):

--- Quote from: Oddjob on February 17, 2023, 08:29:40 PM ---I replaced mine with stainless steel Ted, the originals are not stamped with any high tensile marks AFAIK.

However you need metric fine bolts and a 14mm head for best fit.

--- End quote ---

What pitch is that Ken?

K2-K6:
Some reference charts here Ted

https://www.mudgefasteners.com/thread-pitch-charts

McCabe-Thiele (Ted):

--- Quote from: K2-K6 on February 17, 2023, 08:53:27 PM ---Some reference charts here Ted

https://www.mudgefasteners.com/thread-pitch-charts

--- End quote ---

Thanks for that what I could do with if such a thing exists is a sort or template tool  that I can screw a bolt into so it will tell me the size & pitch.

Navigation

[0] Message Index

[#] Next page

[*] Previous page