SOHC.co.uk Forums > CB350/400
Electronic ignition choices
billdn:
So went for the Boyer with micro coils. Making brackets to mount coils . Bit miffed though as connectors on Boyer are those God awful compression bullets and 4mm to boot so won't fit my loom, without cutting one connector or the other off and replacing. Loathe to cut one's of Boyer as would no doubt invalidate warranty. Did email them to let them know but no reply as yet. Thanks all.
McCabe-Thiele (Ted):
How about fitting a short piece of wiring using appropriate ends fitted to make an adapter provided you can hide the surplus?
billdn:
--- Quote from: McCabe-Thiele (Ted) on March 05, 2023, 02:13:34 PM ---How about fitting a short piece of wiring using appropriate ends fitted to make an adapter provided you can hide the surplus?
--- End quote ---
You read my mind Ted 👍
philward:
--- Quote from: billdn on March 05, 2023, 12:56:25 PM ---So went for the Boyer with micro coils. Making brackets to mount coils . Bit miffed though as connectors on Boyer are those God awful compression bullets and 4mm to boot so won't fit my loom, without cutting one connector or the other off and replacing. Loathe to cut one's of Boyer as would no doubt invalidate warranty. Did email them to let them know but no reply as yet. Thanks all.
--- End quote ---
Forgot to mention that - I changed the connections to standard type - ie, like these
https://www.ebay.co.uk/itm/152873651204
billdn:
I emailed Boyer to ask them if changing connections would nullify their guarantee and they're technical department replied saying that they expect some customers to change them and it wouldn't invalidate any warranty.
But still think I'll go with Ted's suggestion.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version