« previous next »
Pages: [1]   Go Down

Author Topic: Cb360 1976 Right hand switch  (Read 3007 times)

Offline Madagas2002

  • Newbie
  • Posts: 25
    • View Profile
Cb360 1976 Right hand switch
« on: March 16, 2023, 09:28:29 PM »
Hi
I've re-soldered my wiring to the right hand switch
Someone had previously just cut them off.
I've been left with a brown/blue and a black wire.
Can I please ask for help on where these wires should go.
Thanks in advance
John
Logged

Offline Oddjob

  • SOHC Jedi
  • Posts: 4723
    • View Profile
Re: Cb360 1976 Right hand switch
« Reply #1 on: March 16, 2023, 10:55:59 PM »
Black goes into any black connector on the loom. It's the switched feed for the kill switch.

Oddly the brown/blue also goes into a black connector, no idea why Honda did this but it's the feed to the tailight fuse in the fuse box, very odd.
Logged
Kids in a the back seat cause accidents.
Accidents in the back seat cause kids.

Offline Bryanj

  • Grogu
  • *
  • Posts: 12528
    • View Profile
Re: Cb360 1976 Right hand switch
« Reply #2 on: March 16, 2023, 11:35:36 PM »
Do you mean where do they go in the switch or where in the headlamp?
Logged

Offline Madagas2002

  • Newbie
  • Posts: 25
    • View Profile
Re: Cb360 1976 Right hand switch
« Reply #3 on: March 17, 2023, 07:41:29 AM »
Hi,
Thanks for your interest.
Yes, it's at the switch.
I've soldered the white stripe/black twin wire to the cut out switch.
I'm left with the black and blue/brown.
Thanks again
John
Logged

Offline Bryanj

  • Grogu
  • *
  • Posts: 12528
    • View Profile
Re: Cb360 1976 Right hand switch
« Reply #4 on: March 17, 2023, 09:42:18 AM »
I used to have a genuine Honda manual for that but not sure if i still have for wiring diagram.
Is this an original UK one?
Logged
Pages: [1]   Go Up
« previous next »