SOHC.co.uk Forums > CB750
Carbs Install
Nurse Julie:
OK. If you need any photos, cable routing etc, just shout as we have a UK K6 here.
Martin6:
That's very kind, thank you.
Martin6:
I might have found the issue for the cables. Reading the manual, there was a throttle grip adjuster on the underside of the righthand switchgear. This was discontinued from K4s. Mine has the screw adjuster, so it may be an earlier switch set. Does that mean the cables will need to be different?
Nurse Julie:
--- Quote from: Martin6 on March 16, 2023, 07:48:17 AM ---I might have found the issue for the cables. Reading the manual, there was a throttle grip adjuster on the underside of the righthand switchgear. This was discontinued from K4s. Mine has the screw adjuster, so it may be an earlier switch set. Does that mean the cables will need to be different?
--- End quote ---
No, the cables will be the same. Make sure the screw isn't wound in to tight thus causing impingement
Just a thought, has someone glued the throttle tube on, as this can cause stiffness as the glue will be pushed down to the end. Don't ask how in know this 🙄🙄🙄🙄
Edit, forgot to ask if you have the cable routing correct for a UK model as its different to a USA model.
Nurse Julie:
I've taken a photo, this is our UK K2 but the routing is the same for the UK K6.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version