SOHC.co.uk Forums > CB750

Carbs Install

<< < (22/24) > >>

Sesman:
The carbs will be similar weights.😁 Apologies, overlooked it was a 750.

Martin6:
👍

Martin6:
Took the bike for a 20 miles spin. All went very well. I replaced the oil, and had removed and cleaned up the cam chain tensioner, which was seized, while the carbs were off. Properly adjusted, the bike now seems happy to idle at 1200rpm without clatter and so far as the carbs are concerned, it isn't hunting at idle at 1 turn out of the air screw and it pulls cleanly, rolling on the throttle. I changed the needle position to mid point (from 2nd groove up) and this has removed the hesitation. No sign of no.4 running any different to the other 3, but its slide movement is a little stiffer. Can live with that. The twistgrip now self returns to idle, not a snap back, more a smooth 1/2 second meander, but not a problem.

Bonus: I enjoy riding the bike. That's a huge relief! :)

Thanks for the advice. 👍

Martin

Nurse Julie:
Well done Martin, enjoy.

Martin6:

--- Quote from: Nurse Julie on April 11, 2023, 05:08:28 PM ---Well done Martin, enjoy.

--- End quote ---

Thank you  :)

Navigation

[0] Message Index

[#] Next page

[*] Previous page