SOHC.co.uk Forums > SOHC Singles & Twins

Cb360 1976 Right hand switch

(1/1)

Madagas2002:
Hi
I've re-soldered my wiring to the right hand switch
Someone had previously just cut them off.
I've been left with a brown/blue and a black wire.
Can I please ask for help on where these wires should go.
Thanks in advance
John

Oddjob:
Black goes into any black connector on the loom. It's the switched feed for the kill switch.

Oddly the brown/blue also goes into a black connector, no idea why Honda did this but it's the feed to the tailight fuse in the fuse box, very odd.

Bryanj:
Do you mean where do they go in the switch or where in the headlamp?

Madagas2002:
Hi,
Thanks for your interest.
Yes, it's at the switch.
I've soldered the white stripe/black twin wire to the cut out switch.
I'm left with the black and blue/brown.
Thanks again
John

Bryanj:
I used to have a genuine Honda manual for that but not sure if i still have for wiring diagram.
Is this an original UK one?

Navigation

[0] Message Index