SOHC.co.uk Forums > CB350/400

CB400/4, bracketry under fuel tank

(1/2) > >>

Scottish Badger:
Hi folks, on to my next puzzle of "how the previous owner didn't put things together correctly...."

Can anyone help with photos of how the wiring harness is secured and properly routed on the nearside of the frame above the engine, and how the clutch cable is routed and any support brackets etc on the offside?

Thanks.

Multiman:
If you go to ash’s drop box and download the 350/400 manual on page 110 there are some good diagrams if the router of harness and cables

McCabe-Thiele (Ted):
I used this one from here somewhere I think. [ Guests cannot view attachments ]

Scottish Badger:
Hi Ted, yeah I was looking at those ones earlier. Do you know if the clutch cable guide is attached to one of the rocker cover breather cover bolts?  Looks like I'm missing the cable "holder" that goes over the nearside tank mount spigot....

McCabe-Thiele (Ted):
Yes my harness guide & clutch cable guide were missing as well, wiring guide I bought from DS never did find a clutch cable bracket - hard to find - I did have a home made one from a member but it never really fitted properly. I currently use a cable tie with the plastic ring insert for the bracket.

Just found a repro bracket in SS comes with the center heat guide.

.https://www.ebay.co.uk/itm/144768757606?hash=item21b4e3ef66:g:v~oAAOSwKlRjSug7&amdata=enc%3AAQAHAAAAwDW2POL3%2FNRUIKn9kUCDcGh8nA7m121XrGMZX%2BFBPbHD1vCuYXb%2FpNFLxd95oJjnKU%2BFjReUwnQLkgcgKehl5yaKbxcM0aXa0l914yrBRxuB1xHoNXXnu6zsQnzLnkMDwpXWZ8gZICHxRI3P5z%2FpO5bCxyWsrSQ3cqllndzn%2FW9CbAnwPeq%2BA%2F6D9S%2FGk5Pc8PTzcfD2WYwWn3nkHlL8Xir0ABQJoBGSTIT%2B40GaYjVIf3BdyJ9DZCZH%2Fy4cJATYGA%3D%3D%7Ctkp%3ABk9SR_SCgMbgYQ

Navigation

[0] Message Index

[#] Next page