SOHC.co.uk Forums > CB500/550

oil pressure

(1/2) > >>

captaindonutbikes:
oil pressure light not going out when i turn it over.

no oil leaks

brand new oil

checked the scavenger pipe etc all seems flush and sealing.

started after removing the sump and clutch cover to remove the kick start mech. have decided not to run the gears on the shaft as not using it. (could this cause any drop in pressure ?)

any suggestions ?

captaindonutbikes:
when i say gears on the shaft i mean the kick shaft mech !

totty:
IIRC the switch earths the circuit so try removing the wire from it, if the light stays on then you have a short.

SteveD CB500K0:
My thoughts too.  Broken switch or wiring. I've seen a few broken oil pressure switches in my time. They leak and the oil pressurises both sides - hence no measurement!

captaindonutbikes:
shall investigate guys, cheers ;D

Navigation

[0] Message Index

[#] Next page