SOHC.co.uk Forums > CB350/400

Fork leg lower refinishing CB400F

<< < (2/3) > >>

Oddjob:
The problem is contamination of the alloy, they get all sorts of stuff that soaks into the surface, unless you remove this it will come back to haunt you with discolouration and unsightly marks appearing on what looks to be a nice finish. The fork castings aren't the best in the world either, lots of marks and blemishes will appear when you start to strip off the original finish, plus they'll be numerous stone strikes and pits you'll need to get rid off for a decent result. In some ways getting them to a mirror shine and then going back down the scale works best. I've heard getting them really polished and then scuffing them up with a green kitchen scourer works for a satin finish. Never done that myself, if I can get them to a mirror finish it seems a real shame to spoil the effect.

SeanFD:
I did mine using just a polishing kit from eBay; it was quite easy really.

[ Guests cannot view attachments ]

I'm not sure if that is teh finish you're after, but I was quite pleased with it - and myself!  ;D

McCabe-Thiele (Ted):
That looks a tidy finish Sean - did it take a lot of time to get there?

SeanFD:
Thanks Ted. No, that was what surprised me - maybe an hour or two, if I remember correctly. The second one was much quicker and so much better than my first attempt, that I had to go back and do the first one again.

Multiman:
Looks good.
Can I ask which kit?
I maybe stripping my forks in the near future so might as well give em a good polish whilst apart.
Cheers
Tim

Navigation

[0] Message Index

[#] Next page

[*] Previous page