SOHC.co.uk Forums > CB350/400
Cases oem finish
Toko_Jo:
You need this:- For crankcases and covers. (check out the sister USA sohc4.net site)
https://www.radwell.co.uk/en-GB/Buy/DUPLI%20COLOR/DUPLI%20COLOR/DE1615/
But last time I imported some from there it cost me £25/can landed after shipping and customs.
Sesman:
Can you post some pictures of the finish please? Is this a good original match for the alternator, chain and clutch cases?
Toko_Jo:
;)
McCabe-Thiele (Ted):
https://www.frost.co.uk/vht-cast-iron-engine-enamel/?gclid=Cj0KCQjwmdGYBhDRARIsABmSEePCbaToXB0usEPUkOpLCJlcM6IJMXOzWiGj0maZBRi7auTU2W44CSAaAoV7EALw_wcB
Available in a range of colours -BiL has done his Fireblade with this paint - including the frame.Fireblade engine by Macabe Thiele, on Flickr
Nurse Julie:
VHT and Duplicolor is the same paint, made by the same company in the USA. And is OK for water cooled engines that only get up to a maximum of 280c.
Simoniz SIMVHT31D is 800c and is much better for air cooled engines which run at a higher temperature than water cooled.
Edit..... I should have said that the outcome all depends on the prep, regardless of which paint is used.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version