SOHC.co.uk Forums > CB750

Honda CB750k clutch

(1/4) > >>

Pauarc:
Any help can you do the clutch without draining the oil

K2-K6:
Should be fine even on centre stand, but side will tip it away from the opening.

Virtually all the oil should be in the tank on 750, with just residual in the sump.  That's assuming the check valves etc working OK.

Use a drip tray as you'll get a little come out if it's been run recently, but nothing much usually.

Pauarc:
Thanks for the answer only just put new oil in and the clutch still not working properly the gears clunk when changing gear so want to check plates and don’t want to waste the oil

Martin6:
Expect you have checked, but could be the adjustment at the clutch end? 1/4 to 1/2 out with a loosened off clutch cable (both ends).

Nurse Julie:
What 750K clutch ? I think the K6 has a double plate and 6 or 7 different clutches fitted to 750K's.

Navigation

[0] Message Index

[#] Next page