SOHC.co.uk Forums > CB750

Honda CB750 K1 Carb bowl gaskets

<< < (2/3) > >>

Oddjob:
No real heat in a float bowl though, they do get the hot air draught off the fins but they also get cooled quite well. Never felt any significant heat in a carb at all.

I used Gorilla Contact adhesive, worked ok.

cbxman:
Julie, Ken,

Thanks for the info.

I agree that the heat may not be the main issue, but the solvent action of the petrol is likely to weaken it...

I'll give the Gorilla glue a try when I next have the carbs out, as you have had success and is readily available.

Cheers,

Jerry

McCabe-Thiele (Ted):
I would have thought normal silicone might work ok or blue Hylomar.

Johnny4428:
Hondabond?

McCabe-Thiele (Ted):
Methinks Hylomar would be easier to clean off that Hondabond!

Navigation

[0] Message Index

[#] Next page

[*] Previous page