SOHC.co.uk Forums > CB350/400

Cb400f Clutch basket rubber cush drive

<< < (8/9) > >>

amx1992:
A problem you might run into is that it can be really difficult to develop the parts if you aren't making them, it took probably 5 or 6 attempts with small changes each time before mine fit well, which is fine if you have the equipment but is a pain going back and forth with a company. Best bet would be to do 10 or so different designs first, get one of each cut, and see which fits best, then modify from there if it needs it.

Laverda Dave:
Hi Max.

Apologies this has taken so long but I forgot to give my BIL a call when he returnd from Holiday!
My BIL’s company is called  Delta Rubber and is located in Christchurch, Dorset.

I called him earlier today to see if he had any 10mm sheet. The thickest size he has is 8mm but he can potentially get some 10mm sheet but it will depend on how much you need (I know it is not going to be a huge amount).

He asked if you can send one of your existing new cush rubbers to him he can then match up the density and go from there.

His details are:

Martin Bailey
Delta Rubber Limited
Unit 21, Priory Industrial Park,
Airspeed Road
Christchurch, Dorset
BH23 4HD
Telephone: 01425 278 011

Martin works Monday to Thursday.
Give him a call, he’s very helpful and knows his products.

PS - I hope he can provide what you need as I am going to need a set of these rubbers for the 400/4 I am buying to restore :D

Oddjob:
Does he cut rubber as well Dave or just provide sheets?

No news from my water jet person, I've sent him another email to remind him.

Matt_Harrington:
Dave, I think there will be quite a few of us who want sets of these cush rubbers.....

Rozabikes Tim:
Plus one!

Navigation

[0] Message Index

[#] Next page

[*] Previous page