SOHC.co.uk Forums > CB350/400

Timing advance

<< < (2/6) > >>

Laverdaroo:
See


Sent from my iPhone using Tapatalk

Oddjob:
Are you saying it times on 1-4 but won't on 2-3?

If so reduce the point gap.

McCabe-Thiele (Ted):
Sorry Roo I thought the static timing was the easy  bit just follow the manual have you got it so the points with the blue wires are to the coil that is connected to 1&4?😁😁😁

Oddjob:
Roo your setting the 1-4 points in that pic, the crank turns clockwise, so by turning the backplate clockwise you are delaying the timing, turn the plate the other way and check again.

Laverdaroo:
The buggers been running

Just bring a real pig but just whipped 1-4 points off and although they might have been set at the front they very much weren’t at the back

That’s not good. Fiddling, will report back….


Sent from my iPhone using Tapatalk

Navigation

[0] Message Index

[#] Next page

[*] Previous page