SOHC.co.uk Forums > CB500/550
The 500 lack of multiple fuses is there a cure ?
McCabe-Thiele (Ted):
That sounds an interesting option Ken. I already have some new switches with overlong wires so that's a start. I need to make sure I get the right loom & fuse box. A short loom to the ignition switch is no problems.
Oddjob:
Might be able to help you out with a fusebox Ted. Replaced mine with a blade fuse one from Hondaman. Old one is still in perfect nick.
I also have a genuine F2 loom, I bought a nos one but wasn’t sure if I was using it or not, old loom is still good so I was thinking of using that and keeping the Nos one for spare.
McCabe-Thiele (Ted):
I've sent a PM.
Matt_Harrington:
Ted, I've had a shufty at Roo's Motogadget and i was very impressed. It's the diagnostics (micro LEDs) that is really good - ideal for tracing faults etc. My next bike will have one!
Sent from my SM-A032F using Tapatalk
McCabe-Thiele (Ted):
Looking at the price of a new 550F loom narrows the cost difference somewhat when looking at the Motoblathingy.
Perhaps I should not let Rich's dead short nightmare colour my thinking and stay with the original loom.
Ken's solution sounds easier - no rush either way.
Bikes eh so many ways to fill the money pit even more - should have found an old mineshaft to fill with dosh as a contingency option. 😁😁😁
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version