SOHC.co.uk Forums > CB750
CB750 Wiring Issues
Oddjob:
How the hell have they managed that Roy? the brown wire comes from it's own fuse in the 3 fuse fusebox, surely they'd have copied the original wiring? even if the colours are different they'd need the wires to go to the right place. Where's this new loom come from?
royhall:
I think the looms are made in Vietnam, I have had them before and they were spot on. An example is the flasher relay, goes into the loom from the flasher as light blue (wrong) and appears again in the headlamp as grey (correct). Works okay though after a bit of multimeter time. When I built my 750F2 I was able to re-use the loom and switchgear and the wiring was simply connect black to black etc. Done in a morning and right first time. I'm thinking this week I will go to the lock-up and bring my other 750 home, take the headlight off and see if I can copy what's in there onto the K5 (the wiring diagrams looks virtually the same).
Bryanj:
Going back to basics, start with the RH switchgear
1 does it have a lights on/off
2 1,2 or 3 wires to starter button
3 what colour wires go where
Its this bit that buggers up most wiring faults
royhall:
Thanks Bryan. Not in the garage now until Tuesday, will check and get back to you. Thanks for the help.
clinto:
Hello,in your start of this topic you post a colour wiring diagrame.Where can this be found?
I am shortly wiring up a K5.
Ta
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version