SOHC.co.uk Forums > CB350/400

Airbox rubbers orientation

(1/2) > >>

Matt_Harrington:
Having dismantled the airbox and given everything a good clean, I notice the rubbers (air filter side) as slightly angled. Is there a correct orientation for these? I know I will struggle getting it all together but wanted to check first...

Laverda Dave:
You should see a small 'bobble' on the flange of the inlet rubber Matt. These line up with the corresponding 'bobble' on the plastic airbox. Get this right and they should align making life simples :)

Matt_Harrington:
I knew there would be an answer! Thanks  :D

McCabe-Thiele (Ted):

--- Quote from: Laverda Dave on May 15, 2023, 09:38:54 AM ---You should see a small 'bobble' on the flange of the inlet rubber Matt. These line up with the corresponding 'bobble' on the plastic airbox. Get this right and they should align making life simples :)

--- End quote ---

I  agree with Dave - that said it's still a heavy wrestling match to re-assemble - getting all four rubbers to fit - as you will know you get three to fit but a fourth one on 2 or 3 will not as the box distorts.

Matt_Harrington:
Thanks Ted - It's my job for this afternoon! I'll take a chill pill!

Navigation

[0] Message Index

[#] Next page