SOHC.co.uk Forums > CB500/550
500 oil guide B
McCabe-Thiele (Ted):
The oil guide is a bit out of shape at the end but otherwise seems useable - the earlier type 11203-323-000 is available but priced at a hefty £30.85 to order from DS.
My later engine number (CB500E-2010986) should have 11203-323-010 that appears to be no longer available.
TBH I do not know what part I have it was retained in the old engine casing by the threaded bolt - manual shows a self taper 5x16 - my casing does not have a 5 mm thread so intend to fit the correct taper screw.
The guide looks as though it diverts oil to the main shaft needle roller bearing. Will I be okay to re-fit the oil guide - if not would the earlier part number fit?
..
'PXL_20230519_113027305 by Macabe Thiele, on Flickr
Bryanj:
The end number is usualy a supplier or minor mod so should be fine Ted
McCabe-Thiele (Ted):
--- Quote from: Bryanj on May 19, 2023, 01:34:51 PM ---The end number is usualy a supplier or minor mod so should be fine Ted
--- End quote ---
Thanks Bryan.
Oddjob:
If you need either Ted I have both of those, both oil guide and screw and yes it is like a self tapper.
McCabe-Thiele (Ted):
I have sent you a PM Ken
Navigation
[0] Message Index
[#] Next page
Go to full version