SOHC.co.uk Forums > CB500/550
What is this?
McCabe-Thiele (Ted):
Not ringing any bells with me must be somewhere that I have not taken apart - two you say Ken go one where do they go?
Oddjob:
They are fitted underneath the 2 lifter arms on the carb shaft, they key the lifter arms to the shaft so there is no chance of slippage.
Bryanj:
But they are way smaller than the one in the pic!
deltarider:
I'm afraid my info above was not a 100% accurate. The parts list shows the clutch switch cable is not an integral part of the complete unit, but a part that can be separetely ordered. In Hondaspeak: SWITCH ASSY., CLUTCH LEVER. It's #6 in the pic. https://images.cmsnl.com/img/partslists/honda-cb500k2-general-export-f-3-handle-lever-switch-cable_big3IMG01171125_2021.gif
Question: what is the black/yellow wire on Honda's for?
Bryanj:
Black/Yellow is a lighting wire from memory but you cant rely on the wire colours of that switch as the front brake light switch on the small drum braked bikes(up to 125ish) is the same fit with different colours and there was a time when clutch switches were in short supply so brake ones got fitted
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version