SOHC.co.uk Forums > CB500/550
How to do this?
Oddjob:
True but it's the outside screw that would be replaced not the inside ones. Saying that I replaced all of mine with stainless, saves them rusting.
Bryanj:
Dissasemble the switch inside a large plastic bag to contain flying parts!
paul G:
--- Quote from: Bryanj on June 09, 2023, 12:24:55 AM ---Dissasemble the switch inside a large plastic bag to contain flying parts!
--- End quote ---
I will definitely second that ;D Also in my experience when you are putting it back together as those springs and ball bearings are impossible to find again :o :(
Luckily I had some knackered old switches :D
deltarider:
Unfortunately now my clutch switch cable doesn't work as before. Probably it got damaged in the process of removing and reinstalling in the clutch grip. I have temporarily removed it altogether for inspection. If I fiddle with it, it sometimes works and sometimes not. On close examination I noticed on the switch side it has a little piece sticking out as if it has to sit in a certain position. Does any of you know if that is the case? Can I repair it?
McCabe-Thiele (Ted):
There is a small slot in the lever unit that the small notch fits into if they are the same as a 400 unit cheap ones on bay that work.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version