SOHC.co.uk Forums > CB750
Clutch plates
Pauarc:
I have added some pictures I must be missing something I have a 25mm shim
Trigger:
I am not sure what the washer is in picture number 3 you have posted. Can you post a picture of that washer on its own and not on the shaft.
I have just fitted a shaft to a set of crank cases and the thrust washer i was on about is the other side of the bearing so, forget about that one as, you will not even see if on a clutch change
Pauarc:
Shim washer
Oddjob:
Have you got this fitted?
https://www.cmsnl.com/honda-cb750k2-four-england_model14363/washer-spline25mm_90432300303/
There is also this fitted between the clutch basket and the bearing.
https://www.cmsnl.com/honda-cb750k2-four-england_model14363/thrust-washer_90458506810/
Trigger:
--- Quote from: Pauarc on July 04, 2023, 06:48:59 PM ---Shim washer
--- End quote ---
I am not sure were this shim washer has come from. Once everything is in you have a bevelled washer with outside stamped on it, then the clutch locking washer and then the locking nut.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version