SOHC.co.uk Forums > CB350/400

400/4 main bearing shells

<< < (5/5)

Bryanj:
All the big bolts

davidcumbria:

.Dave I did not think Yellows were listed for a 400 mains journal I thought the tables show Brown or Black for  journal "C" mains ?

Yellows were they not for journals marked A only?
[/quote]
Sorry yes I got my Aand C mixed up. As Ted said for B ‘s go for brown not green if in any doubt. 4 B s is a lucky result for shell availability.

Also when bolting up don’t forget the locating dowels if you’ve removed them.

Matt_Harrington:
It's gonig to be a week or so before the cases come back.
It gives me time to sort the other items to replace.....

Thanks for the input so far.

GC400:
Hi Mark, I have just been through this:

The letters on the case and the numbers on the crank match to a table. I did this method and then measured the clearance with plastiguage and torqued the cases together. When measuring they were all in the centre of the tolerances. For me the chart, letters and numbers worked out to be great.

Only bad thing was I did need yellow and I could only find in Greece.

Navigation

[0] Message Index

[*] Previous page