SOHC.co.uk Forums > CB500/550

Clutch pinion gear

(1/2) > >>

gary123:
Can anyone confirm (or not) that this is the correct spacer for the clutch pinion gear please.
ID 22mm
OD 30mm
Width 13.5mm

I also need the pinion gear itself (No 10} if anyone has a spare they dont need. [ Guests cannot view attachments ]

gary123:
I think Ive answered my own question re spacer. It is the right size, but still need pinion.

Bryanj:
Is it for a 500 or 550 as they are different

Oddjob:
As Bryan says, the gear is different between the 500 and 550, not sure whether it has 1 tooth more or less, think 1 tooth more for the 500. You'll know if it's wrong as it won't mess with the clutch basket if you get the wrong one.

You looking for one Gary? probably got both lying around.

gary123:
Sorry for late reply, had to rush a mate to hospital, he's OK but 5 hours of my life gone. Mustn't complain he got excellent treatment and a diagnosis of potassium deficiency, so all good.

Back on track, yes its for a 500 and if you have a spare one Ken Ill happily pay you for it.

Navigation

[0] Message Index

[#] Next page