SOHC.co.uk Forums > CB500/550
500 oil guide plate position sought.
McCabe-Thiele (Ted):
--- Quote from: Trigger on July 06, 2023, 02:00:26 PM ---Link page E8 >>> http://www.sohc.co.uk/index.php/topic,16659.msg140815.html#msg140815
As i said it is hard to see from the picture . Easier to pop the gear change lever on and change gear that way ;)
--- End quote ---
I'm confused link only goes to P3 ?
I'll pop the lever on and see what happens - I will be so downhearted if I have to split the cases to fix the issue!
Trigger:
--- Quote from: McCabe-Thiele (Ted) on July 06, 2023, 02:06:42 PM ---
--- Quote from: Trigger on July 06, 2023, 02:00:26 PM ---Link page E8 >>> http://www.sohc.co.uk/index.php/topic,16659.msg140815.html#msg140815
As i said it is hard to see from the picture . Easier to pop the gear change lever on and change gear that way ;)
--- End quote ---
I'm confused link only goes to P3 ?
I'll pop the lever on and see what happens - I will be so downhearted if I have to split the cases to fix the issue!
--- End quote ---
Sorry wrong link, now corrected ;)
McCabe-Thiele (Ted):
Yes I did re-check the parts manual and the washer goes after the circlip on the kick start as you said.
Someone has previously put it together wrong I just repeated the error.
McCabe-Thiele (Ted):
--- Quote from: Trigger on July 06, 2023, 02:00:26 PM ---Link page E8 >>> http://manuals.sohc4.net/cb500/service_manual/PL500K0_K1.pdf
As i said it is hard to see from the picture . Easier to pop the gear change lever on and change gear that way ;)
--- End quote ---
Good shout Grahame I have just popped the rear cover in place & fitted the gearshift lever - now it seems to work but can't decide how many gears there feels like one in one direction then four in the other - not easy when trying to turn the shaft at the same time but looking good atm.
McCabe-Thiele (Ted):
--- Quote from: Oddjob on July 06, 2023, 01:21:21 PM ---Sorry but 2 big mistakes spotted now.
--- End quote ---
Okay Grahame has identified the kick start washer being the wrong side of the circlip so that's one issue sorted.
So far I have learnt that you need the gear lever in place for it to work so what is the other big issue?
I will check the manual for washer etc on the mechanism Ken.
I'm waiting for my outer oil guide from DS - wrong type of bolt on the bearing retainer plate - that will be sorted when the oil guide goes in so what have you seen please Maestro Ken ? :-\ :-\ :-\
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version