SOHC.co.uk Forums > CB500/550

Rear wheel hub fitting

<< < (4/7) > >>

Athame57:
Happy birthday Gary, remember when these where new?  ;D

McCabe-Thiele (Ted):
Not sure if it helps but I had issues with the wrong spacers on my 500 K0 frame - the wheel was to the right of centre I have now fitted as below standard ones in SS from Max.

My brake side spacer is 45 mm - chain side is 32 mm I believe if you have 500 hubs they are the standard size.

Trigger:
The distance on the swinging arm at the ends should be 242  ;)



[ Guests cannot view attachments ]

McCabe-Thiele (Ted):
Not that it needs confirming - fwiw my rear forks are 242 between the ends also.

gary123:
Thanks for all the info (and birthday wishes0
Swing arm is 242
Left spacer is 32
Right is 50 so that must be the problem. I do have others but not a 45.
Anybody got a manky old one they want to sell ? I know stainless are available but I was going to paint it so seems a bit over kill. [ Guests cannot view attachments ]

Navigation

[0] Message Index

[#] Next page

[*] Previous page