SOHC.co.uk Forums > CB350/400

Earth nuts in headlamp

(1/2) > >>

Athame57:
Are the earth nuts on both sides of the headlamp shell interior meant to have a single terminal like the one in the picture here, or have separate ends? I've seen both on the internet now, whatever mine are a bodge and one is rusty as hell so I want to replace, but which is it?  ( BTW...Earth nuts, that is what the Germans call peanuts!  ;D )

Trigger:
Both will work, maybe they were different for different countries. UK 400's were singles  ;)

Athame57:

--- Quote from: Trigger on July 11, 2023, 08:02:17 AM ---Both will work, maybe they were different for different countries. UK 400's were singles  ;)

--- End quote ---
Like the one in the pic? It is actually on the 400Four website, but I havn't had an answer from him yet...........

McCabe-Thiele (Ted):
My UK 400 had one earth nut on each side as does my 500 - my parts book also shows Qty 2.

IIRC each wire had a connector not two into one.

Athame57:

--- Quote from: McCabe-Thiele (Ted) on July 11, 2023, 10:09:09 AM ---My UK 400 had one earth nut on each side as does my 500 - my parts book also shows Qty 2.
IIRC each wire had a connector not two into one.

--- End quote ---
Yes, I just managed to find out myself, part 466 in this image from cmsl. Meanwhile my left front indicator has stopped working since I put the jungle back together. It seems the bodger of the past has left another fish under the floorboard for me.  ::)

Navigation

[0] Message Index

[#] Next page