SOHC.co.uk Forums > CB350/400
Main bearing and primary guides advice
Oddjob:
Save your money and just buy the shells based on the markings, if they weren't badly marked etc they'll just be worn so the surfaces they are sitting in will still be fine. Plus plastigauge only really works with new shells or you're just measuring the wear in the old shells and unless you know what colour that is you're wasting your time.
Unfortunately the mains are all blacks and they ain't easy to find, there is only one shell bigger and that's blue and given a choice always fit a larger shell not smaller, of course always fit the right one whenever you can but what with availability that's not always possible. The conrods if you were going to replace them are 2 sets of yellows and 2 sets of green, A2 is yellow, A3 is green.
McCabe-Thiele (Ted):
Last time I looked (last week) DS had black mains in stock.
Oddjob:
He has 8 big end black shells Ted but no mains. None on the web either.
Bryanj:
Try Yamiya in japan
McCabe-Thiele (Ted):
--- Quote from: Oddjob on August 20, 2023, 10:09:16 PM ---He has 8 big end black shells Ted but no mains. None on the web either.
--- End quote ---
You are correct again Ken my Bad.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version