SOHC.co.uk Forums > CB350/400

New to CB400 four and new here! Front brake improvement?

<< < (8/21) > >>

Mikep328:
OK!  So if I understand correctly, the mid '90s CBR 600 MC will work with the OEM caliper/rotor on a 1976 CB400 four.   Right?

Trigger:
There is no quick fix on a braking system .
Roo has forgot to mention that he doesn't have standard handle bar switches and his bike is £££ modified  ;) 

robvangulik:
The CBR600 master is most likely a half inch or 12,7 mm, which is fine for a single 38mm piston caliper.
On all Honda masters the piston diameter is cast on the outside, most often facing the handlebars.

Trigger:

--- Quote from: robvangulik on July 24, 2023, 03:16:09 PM ---The CBR600 master is most likely a half inch or 12,7 mm, which is fine for a single 38mm piston caliper.
On all Honda masters the piston diameter is cast on the outside, most often facing the handlebars.

--- End quote ---

My up to date tech data Honda book only shows the spec for a CBR600 from 1999 and the size is 13.958 to 14.000 mm  ;)

robvangulik:
I've put a 12,7mm 1994 CBR600 master on my CBR1000F.....was 5/8 inch.

Navigation

[0] Message Index

[#] Next page

[*] Previous page