SOHC.co.uk Forums > CB500/550
Fitting a Delkevic exhaust system on my CB550F 1977
Trigger:
I have always ordered the one for the bike i am fitting it to. The strange thing with the Delkevic site, is if you put in CB500 Four if comes up with part number COM3299 but, HDR000B should be the same fitting for that style of pipes.
I have never measured up different frames to see if there is any difference on the foot peg location. I know Motad used to fit all but, the silencer on the Motad had a big slide adjuster on the silencer to position the bracket .
You will have to email Delkevic, send some pictures of your problem to find the answer
alexdecker:
--- Quote from: Trigger on July 24, 2023, 07:52:38 AM ---I have always ordered the one for the bike i am fitting it to. The strange thing with the Delkevic site, is if you put in CB500 Four if comes up with part number COM3299 but, HDR000B should be the same fitting for that style of pipes.
I have never measured up different frames to see if there is any difference on the foot peg location. I know Motad used to fit all but, the silencer on the Motad had a big slide adjuster on the silencer to position the bracket .
You will have to email Delkevic, send some pictures of your problem to find the answer
--- End quote ---
Mmh, I am getting HDR000B for the CB550F, but HDR000A for the CB550K. I wonder what the difference is between those two parts.
I will call them and try and get some answers.
McCabe-Thiele (Ted):
I know style & fashion change over the years - I can still remember seeing the four pipe systems on the old Hondas when they were new thinking they looked really dated/old fashioned somehow being so bulbous - not to mention the great asymetric 4 into1 look.
Now 50 years later here I am seriously thinking the 4 pipe look is what I want!
The eye of the beholder eh.😎😎😎
Sesman:
4 pipe all the way Ted. You know it makes sense.
McCabe-Thiele (Ted):
Definitely makes fiscal sense plus SS too.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version