SOHC.co.uk Forums > Project Board

Starter switch

<< < (4/4)

gary123:
will do.

Trigger:
You know were i am if you need me mate.
If it was not pissing it down all the time, i would take a ride over and see what stage you are at  ;)

gary123:
Thanks Graham. Yes, stop by anytime, be nice to see you both.

Bryanj:
You can use the swich you have if you go to the solenoid 2 small wires and leave the yellow/red where it is but change the other small solenoid wire to an earth and not a power, also make sure all the blacks from the rh switch are connected to black in the headlamp.
All you are doing is powering the solenoid instead or grounding it

gary123:
Cheers Oddjob, Im going to see what else Ive got.

The thing that threw me was the thing works when grounded .
 It looks to my non electrically trained mind that the solenoid gets power from the small black wire and the yellow/red is earthed when the switch is pushed, thereby creating a circuit.
 My switch (550} has an extra wire from clutch lever switch (to stop in gear starting without clutch, I think) I reckon I could use this switch by making it earth and doing away with the black "safety" wire. Anyway what could possibly go wrong. :-\

Navigation

[0] Message Index

[*] Previous page