SOHC.co.uk Forums > Project Board

Starter switch

<< < (2/4) > >>

Nurse Julie:
If I'm thinking correctly, I think there should be a pin/dowel in the bottom half of the switch case that fits in a hole in the handlebar. It depends which type of switch gear you have though.

gary123:

--- Quote from: Nurse Julie on July 22, 2023, 10:39:48 PM ---If I'm thinking correctly, I think there should be a pin/dowel in the bottom half of the switch case that fits in a hole in the handlebar. It depends which type of switch gear you have though.

--- End quote ---

OK, Thanks Ill check that out in the morning.

Bryanj:
Look inside the switch and tell me how many wires go to the starter button, there are two type of switch which work differently

gary123:
Two wires, black and red/yellow.
All the wiring diagrams show an earth which is what I confused by.

Trigger:

--- Quote from: Bryanj on July 22, 2023, 11:02:35 PM ---Look inside the switch and tell me how many wires go to the starter button, there are two type of switch which work differently

--- End quote ---

Good call Bryan. If you have two wires they should be a black live feed and a yellow / red out. The Black live feed may also come from a connection from the left switch  ;)

Navigation

[0] Message Index

[#] Next page

[*] Previous page