SOHC.co.uk Forums > CB350/400

Play in front wheel

<< < (2/2)

McCabe-Thiele (Ted):
Have you fitted new wheel bearings, is the bearing retainer punched in place if you have replaced them?

Just my thoughts.

Oddjob:
Maybe someone took the spindle out to replace the bearings or get as puncture fixed.

If it was a puncture repair or a new tyre the shop may have removed the spindle to put the wheel on a balance machine, just put it back in place afterwards thinking the owner would tighten it and the owner never even knew it had been removed

Mikep328:
I haven't done any work to the wheel - it is as received when I bought it two weeks ago.  The bike had 4 former keepers so no telling what they did!  ;)

The bike still has has its 1977 registration/tax tag but no service/parts records until 2018.  There are numerous receipts/shop records from 2018 so my impression is that the bike sat for many years somewhere and was revived in 2018.  It also had new tires then but they need replacing - lots of small cracking in the sidewalls.  I would replace them myself but since the community garage (where the bike is located) is 3/4 mile from the house and I have to physically carry all tools/parts back forth to do any work (and stay within the parking slot), I think I'm going to have a shop install the new tires - either Avon Road Riders or Dunlop K82s...haven't decided.  Thoughts re tire choice?

TrickyMicky:
I use K82's on my 400.  I wanted a compromise of period looks and fairly good grip, also I found they are fairly good in the wet. I you want to ride a bit harder, then the Avon Road Riders are VERY good. I use them on the little GB250 Clubman, and they have turned me into a 75 year old teenager!

Navigation

[0] Message Index

[*] Previous page